Tip:
Highlight text to annotate it
X
Once you have unpacked the printer and its accessories from the box
connect the power cable to the power supply unit and plug the power cable connector into the printer.
Next, plug the end of the power cable into an earthed power socket.
The printer is powered on: the control panel lights up showing the printer is working properly.
To install the printer driver,
insert the ‘Drivers, software & documentations' CD into your computer
and select the print driver menu.
A program will guide you through the entire installation process for the driver.
NB: it is essential install the printer driver before connecting the printer to the computer via the USB cable.
Once the machine has been installed on the computer, connect the USB cable to the computer and printer.
Open the printer cover and insert the ribbon.
Close the cover and press until a click is heard. The ribbon positions itself automatically.
Open the card feeder.
If necessary, adjust the gauge lever from right to left depending on the thickness of the cards used, from 0.25 to 1.25 mm (10 to 50mil).
Insert cards into the feeder (capacity: 100 cards maximum of thickness 0.76mm).
Note that the cards are printed on the upper face.
Close the feeder.
Run a print, the printed cards are delivered to the output hopper
(capacity of the hopper: 100 cards maximum of thickness 0.76mm).
To remove the printed card, open the door of the output hopper.