Tip:
Highlight text to annotate it
X
Hey guys, today we're gonna make skate / scooter wax. We're gonna need a candle-probably parafin
candle, cuz' that's the best, I'm gonna be using this orange one, plus two white ones,
witch are just tea candles.You're gonna be using an aluminium can, a pan, some oil, butter
and a glass of water. You're gonna need three cups(or less) but don't use anything plastic,
like this thin bottle over here, an oven, and, ummmm...what was that??i don't know...so
let's just pour the water inside if that pan there we go... okay, how we're turn on the
heat, that will probably do. Alright, to max... And now we're gonna, while this is on there,
I'm gonna break this candle into little pieces. So there, in half, there we go, little pieces,
right? And, if you have the little candle, this is how you open it. Ummmmm... you won't
pull it out, cuz there's some glue under there, and you're gonna need a knife, get it at the
side, like that, and just press down, get that opened like that, and pull the candle
out! There you go! It's that easy! So, to recap: Knife, Pull, Open, And get it broke
in half. And once you've done all that, you get all the wax into that container thing-aluminium
can you've got there... That's a lot of wax! A lot... So now you get 50 grams of butter
at least that's what i'm getting, and you just put that in there... yeah... I get it!
In there! And you're gonna need 2 ml of oil i mean, I'l be using 2 ml if you're gonna
make less use 1 ml... if more, like 3 ml or something... Now you're gonna put all that
mixture in that water, and let all the air bubbles underneath the container go out.Like
that. Now you're gonna stir once in a while, and make sure it's cooking well over 30 minutes.
once you stir, and there are no more chunks of wax in there, leave it on for 5 minutes.
That will do its job. once 5 minutes is over, turn off the he heat, put the pan to the side,
take the wax, slowly, so you don't pour it all over the place, and pour it in the containers.
Again DON'T USE THIN PLASTIC,SINCE IT WILL MELT. There we go. Don't pour too much, like
over, that's just spilling the wax everywhere. There we go. Just a little bit more. And now,
all the containers are full, so, if you have an option to place them outside, I would highly
recommend it, because they will dry sooner and better it's cold outside-probably... and
yeah...okay, so we waited to the morning, and this is our wax now! And it's quite good!
And, if it doesn't like... drop like this one, you go, with a knife along the side like
I did on this one. It will drop out.Just give it a few good hits. And yeah, that's the wax!
NOW GO SKATE LAZY ***! Hey guys! I hope you've made your own wax! now go skate it! And before
you do that, don't forget to leave a like and subscribe! Will help me out a a lot! and,
if you checked this video out, you probably need to check out some more skateboarding
channels! click here for ride channel! There we go ! Click there for ride channel, click
here for blair... blar...Braille Skateboarding, and click here for Andrew Schrock! You're
not gonna be disappointed, Trust me! What are you still doing here?? Click the boxes
already! Uhh god! We're just gonna sit it out then! Alright I'm done watching!