Tip:
Highlight text to annotate it
X
Today in our 2008 Jeep Liberty, we'll be installing the CURT T-connector Wiring
Harness with 4-Pole Flat Trailer Connection, part number C56183. To begin our install,
we'll first open up the rear hatch. There are two screws for each assembly. We'll
go ahead and remove the screws and then pop the assembly out of its position being careful
not to break the alignment tabs underneath. Then, we'll go ahead and press on the
wiring connector and remove it from the taillight socket, setting the taillight aside. Now with
the driver side done, I'll go ahead and repeat the same process on the passenger side.
Next, we'll take our new CURT wiring harness and feed the green wire connector down between
the bumper cover and body
or
sheet
metal
of
the vehicle.