Tip:
Highlight text to annotate it
X
Occasionally we see someone try to reinvent the mountain bike, and the front suspension.
This usually ends up being more complicated and less reliable then what is on the market.
Of course, a few years back, the air suspension was a successful re-engineering of the standard
coil suspension fork. Now, a company in Iceland may have done it
again. The lauf fork is a leaf spring suspension
not much unlike the leaf suspension used since medieval times and is still used on heavy
vehicles today. However, what is different is technological
advancement in material used in the lauf forks. This fork is made of carbon fiber.
The leaf springs are made of an impact resistant composite with a progressive spring rate.
There are three stiffness options to choose from.
The first production of the lauf fork will be for 29 inch wheels and is strictly designed
for cross country riding. It will weigh just 980 grams.
That is essentially a full pound lighter than the lightest viable air/coil suspension forks
on the market. Since there are no moving parts to fail, there
is virtually no maintenance required. And as any XC rider will tell you, the less
time you spend needing to perform bike maintenance, the more time you can spend on the trail.
It is important to note that this fork will have an equivalent travel of 60mm.
This may not seem like much, but the vast number of XC 29er riders never bottom out
their 80-120mm coil air forks. The MSRP in the US will be $990.
Several color combinations are available, and lauf is accepting pre-orders for second
quarter delivery in 2014. Lauf CEO has already confirmed they are working
on a 650b, so keep an eye out for that as well.
Now, I would also like to point out that because of the leaf springs, there is a slight curve
to the compression. With standard suspension forks, the compression
is a very definite angle. It is at this point where impact absorption
is at its most efficient. Any impact higher will result in an indirect
impact angle to the fork compression. This is why most XC riders preload the suspension
just before an obstacle and then try to make the sweet spot the point of impact.
However, with the lauf, the pivot angle causes the sweet spot to be a little higher and a
slightly broader angle. This image is exaggerated to better visualize
the point. This may not seem like much, but it does mean
your area of impact can be a little less precise and still maintain efficient impact compression.
With a five year warranty for the original owner, the weight, and price point of this
fork, it is very likely to be a hit with the XC 29er community.
I will definitely give this fork a try and post a review, so don't forget to subscribe
and keep a look out for it in my future videos. Don't forget to check out the Lauf web site
and facebook page for further information. Thanks, and have fun out there.