Tip:
Highlight text to annotate it
X
Today on our 2013 Chrysler 200 well be test fitting the Thule Gateway trunk mounted two
bike carrier, part number TH9006XT. Before we begin our test fit well first need to refer
to the Thule fit guide or the included instructions to determine what number our fit dial should
be at. After setting our fit dial well place the carrier onto the vehicle. Well put the
top hooks at the top part of the trunk, the side hooks to the side part of the trunk just
above the taillights and the bottom hooks to the bottom part of the trunk. Well then
tighten down the straps to secure the carrier to the vehicle. Well secure the excess slack,
and were ready to load our bike. Well pull out the grey levers on the left
and right hand side of the carrier to swing the cradle arms out. Note that the cradle
arms do need to be level or slightly angled up. Well undo the cradle straps, set the bike
onto the frame cradles and secure it with the straps. That completes todays test fit
for the Thule Gateway trunk mounted two bike carrier, part number TH9006XT on our 2013
Chrysler 200.