Tip:
Highlight text to annotate it
X
So now we're going to take off, our guitar strap holders. And also the string holder.
What I'm going to do here, use my screw driver. What we'll need is flat head here. And I'm
just going to take this off, held in with a screw.
The wood's old, so you want to do this, gently. You don't want to ruin the wood. We definitely
don't want to strip, any holes in this guitar. Now we're going to take off and see what I'm
doing here. We're going to take off, the guitar strap, strap holder. As well as the string
holder. The screws, just being careful. I'm taking this off. You want to apply pressure
when you take off, a screw. But not too much. Where if you lose the screw, you're going
to scratch the guitar. So you want keep control of the screw driver. Because this guitar is
scratched enough. We don't want to, we don't want to add the problem. We want to be part
of the solution. Oops! that was just part of the problem. One has to do that again.
And now finally, we have this strap holder. Which is held in there with a self attached
screw. And we use our pliers here. I'm just going to give this a twist. Got to give it a real good push to get them going,
sometimes. Because they're held in through pressure. This comes off and we're ready to
go.