Tip:
Highlight text to annotate it
X
Yeah, I'm Charlie Henley. We're here at BAK Industries. We're here to show you the RollBak
G2, its outstanding features, and why it's the perfect choice for you for yourr truck.
For those of you that use your truck like a truck, this is the perfect product for you.
It's durable, heavy construction. It's easy to use, smooth, versatile. It's everything
you need for your truck and then some.
Part of the secret of this product is it's heavy, aluminum extruded slats, which are
made from aircraft quality aluminum, that are powder coated with a wrinkle finish that
will weather the test of time and the extreme elements. The latching system is a simple
pull-release cable. You can install stopping points anywhere along the stopping rail surface,
for fifth wheel applications, and for partial open and driving with the cover open. BAK
Industries has worked very hard to come up with a patented design in their rail system
that not only makes it easy to install, but it makes it a superior product. There is a
Teflon guide along the bottom and on the inside of the rail that allows the cover to roll
freely forward and back and have a smooth operation. Also, there is a slotted inner
rail that allows for easy adjustment. While the factory provides the rails preset so that
they are easy to bolt on installation, you can make manual adjustments on spot if necessary.
Attention has been given to every detail. Not only is it an easy bolt on, but there
is a very sleek watertight seal that joins the rail snugly to the bed cab. You'll notice
we have our Pro Cap installed here on the Silverado truck, and it has a nice matching
finish with the textured finish on the cover.
Another nice thing about the cover is how easy it operates. One hand operation will
pull the cover close from either side, as well as there is a release to roll the cover
forward, that is available from either side, drivers and passengers.
The canister allows for drainage. The spigot faces forwards so that you won't knock it
off while loading and allows drainage through the bed of the truck. RollBak G2 comes standard
with latch stops at the rear so that it latches fully closed and pulls fully open. You can
have an option to add a stopping point midway at any point you wish just by simply installing
the initial clip. The cover is very easy to operate. Anybody can do it. It really takes
little effort. Again, pay note to the details. There's a watertight seal along the tailgate
to ensure watertightness.
Security for the RollBak is very simple. There are no exposed latches from the top. There
is nothing to freeze. There is nothing to fail. It's all concealed and protected underneath
the cover. Close the cover, lock your tailgate, and it's completely secure. The strength and
stealth of the RollBak G2 is very sturdy. It will hold up to 400 pounds of weight on
top, but with a little common sense, and with easy operation, why not use the truck bed
surface like it's intended to. When you're out and about and you need to do something,
pick up something that's large and awkward, it's ready to get out of the way when you
need it to. You can still stow things securely underneath in the front, which works great
for tall, awkward objects and also for fifth wheel applications.
Now that you've seen how useful and versatile the cover is, you need to know how easy it
is to install. Each of the rails is all preset from the factory, as we may have mentioned
before. For the simple clamp on installation, the shorter beds with 3 clamps on each rail
or the long beds with 4 clamps on the rail. Another one of the intended designs is a small
canister that reduces the space taken in your bed, allowing you more room to stow your gear.
One of the single best advantages about RollBak and the BAK Industries tonneau cover line,
if you didn't know this already, is that they will improve your fuel mileage by up to 11%
fuel economy. Then over the next couple two or three years, this product will put money
back in your pocket and pay for itself.