Tip:
Highlight text to annotate it
X
If you're looking for a simple gift that is appropriate for nearly anyone, consider making
a keychain. Homemade keychains are inexpensive and fun to make yourself. They are also easy
crafts for kids to make with a bit of grown up assistance. Here are a few ideas to get
you started making your very own keychains. Method 1
Making a Clay Keychain Gather your materials..
Making a clay keychain requires mold-and-bake clay (also known as polymer clay), a small
cookie cutter, a large needle or toothpick, and a split ring or keychain assembly.
Split rings come in a variety of shapes and sizes. You can buy larger ones that a decorative
clay shape can be directly attached to or you can buy a more complex split ring and
chain assembly that is made specifically to attach your own keychain art to. Pick whichever
one you like. You can even reuse parts from an old keychain if you have one lying around.
Roll a small piece of the mold-and-bake clay to a thickness of about 1⁄8 inch (0.3 cm),
using a rolling pin or other rolling tool (you may even be able to use a pen or pencil)..
The clay should come out smooth and the thickness should be uniform throughout.
If desired, press more than one color together to create a swirled effect. You can even make
small shapes and press them into a larger piece of the clay. Be creative!
Use a cookie cutter to cut the clay into the desired shape..
Choose the shape of your choice, such as a flower for Mother's Day, a clover for St.
Patrick's Day, a heart for Valentine's Day. Sports fans will enjoy a keychain shaped like
a basketball, baseball or football.
You can also create your own shape for your key chain with a sharp paring knife or utility
knife. Create a hole approximately 1⁄4 inch (0.6
cm) from the top of the shape, using a sharp object such as a needle or toothpick..
This hole will be used to attach your clay shape to the split ring, so make sure the
hole is in a position that will make this possible.
Many mold-and-bake clays allow you to attach small jewelry findings, such as small metal
loops, directly into the clay before baking. If the clay you purchased allows this, it
may be a good idea to attach a loop of wire to your clay shape so that a split ring can
be easily attached to it later. Place the clay shape on a baking sheet and
bake according to the directions on the package.. Remove from the oven and allow to cool completely
before attempting the next step. Attach your slip ring or keychain assembly
to the cooled shape.. Be careful not to be too rough when connecting
the two pieces together, as it could break your beautiful new keychain.
Method 2 Making a Foam Letter Keychain
Gather your materials.. You will need to collect at least two colors
of craft foam (one that has adhesive on it and one that doesn't), scissors, and a split
ring or key chain assembly.
You do not need a ton of craft foam! Even pieces only a few inches long and a few inches
wide will work just fine. In fact, this project is a good one to use up scraps from other
projects. Cut out small squares of the adhesive craft
foam measuring approximately 2 1⁄2 inches (6.4 cm) each..
You will need to cut out as many squares as letters you want on your keychain.
Alternatively, use up to four different colors to create a keychain with layers of color.
When deciding which letters to put on your keychain consider using your initials (if
the keychain is for you) or a simple four letter word that is important to you, such
as "love" or "cute". You don't want a huge keychain hanging off your keys, so keep it
short and sweet. Write out one of the letters you have chosen
for your keychain on each piece of the craft foam using a pencil or marker..
Each letter should be about 1 inch (2.5 cm) tall.
Use block letters to draw each letter to that when you cut out the letter the center of
the letter will be the color of the foam, not the color of your pen or pencil. Try a
creative design or font that will make the letters unique but legible.
Use a pair of sharp scissors to cut out the craft foam letter..
Take your time to cut the letter out as neatly as possible. If the letter you are cutting
out has a central area that you need to cut out, start cutting in the center of the area,
away from the edge line. This way you can be careful and gradually cut away the foam
up to the line. Lay all the letters on of the remaining piece
of craft foam, the one with no adhesive.. Decide how they should be arranged and what
the overall shape and size of the finished keychain should be.
Don't take the backing off of your foam letters just yet. Take the time to make sure your
layout is just the way you want it before you do!
Cut out the overall shape of your keychain on the craft foam..
Remember that all of the letters you cut out earlier should fit onto it with space around
each to frame the letters nicely.
While a rectangular shape is just fine, remember that you can be creative with this shape too.
Peel the backing from each letter.. Stick each letter onto the larger piece of
foam, working carefully to be sure the letters are lined up. Be sure to press each letter
down firmly, so that they won't fall off. Use a paper punch, or something with a sharp
point, to make a hole about 1⁄4 inch (0.6 cm) from the top of the foam shape you have
made.. This hole is for the ring to attach to, so
make sure you are putting it in a spot that will make that possible.
Attach a split ring or keychain assembly through the hole..
Be gentle with the foam, as you don't want to tear your project at the very end. Now
you have a great personalized keychain that is ready to use.
Method 3 Making a Lanyard Keychain
Gather your materials.. To make a lanyard keychain all you will need
is a split ring or keychain assembly and some thin rope or plastic lacing. The rope or lacing
will need to be at least four times as long as you would like your finished lanyard to
be, so lengths will vary, but they need to be at least three feet long so you will have
enough rope to handle.
Cut two pieces of the rope or lacing the same length. It is nice if each is a different
color, so that your finished keychain is colorful and so it's easier to keep track of where
you are in your weaving process. Some people like to make these keychains with
paracord, so that if you are ever in an emergency and you need a bit of rope, you will have
it with you! Thread both ropes through the ring or keychain
assembly.. Make sure the center of each rope is positioned
at the ring (unless you are using a weaving technique that requires something different).
Secure the ring to a flat surface with a piece of tape. This will allow you to have a secure
project as you weave. You should now have four ends of rope to weave together.
Pick a spot to attach your ring that allows you to have a lot of room to weave your ropes
together. A great spot is a table that is free of clutter.
Weave the ropes together.. There are a variety of techniques you could
use for weaving your keychain, but even a simple braid can look beautiful with the right
rope or plastic lacing. Whichever technique you use, make sure to keep your strands tight
and don't be afraid to undo a bit of your weaving if you find you have made a mistake.
It's better to fix a problem now than notice it in your keychain forever.
For an assortment of weaving techniques see: How to Make a Cobra With Plastic String, How
to Make Lanyards, and How to Make a Box Styled Gimp. Any technique you have used for lanyards
or friendship bracelets should work for making a keychain.
Tie off the ends your rope and make sure to neatly trim them..
Your lanyard keychain is finished! Thank you for watching!