Tip:
Highlight text to annotate it
X
OK. If you need to do this method it's better to use a hacksaw and take out the blade and
do it in between but I am going to be using a sawzall today. What we want to do is kind
of protect the tank as much as we can because there is a good chance that this will break
it if not so this is not really the recommended way. You can try to cushion your tank and
bowl as much as possible. Water is turned off at the angle stop and remaining water
has been vacuumed from the tank with a wet dry vacuum. In order to get in there we are
going to have to get in there right between the tank and bowl right to the bolt. So it's
going to be a tough one. Get ready for some noise. Alright. Deed is done.