Tip:
Highlight text to annotate it
X
Hey guys! Today I'll show you how to change the oil of your V50.
We need a couple of things to do so. First of all: Oil 250ml SAE 30,
then a ratchet with 13m and 11m nuts,
and magnetic screws by GrandSport.
I'll also test the oil sponge pad which is supposed to absorb up to 5l.
First of all I put the pad under the scooter.
The oil drain screw is positioned at the bottom, the filling screw at the top.
Now we loosen the oil drain screw.
While the oil is pouring out, we open the filling screw.
The GradSport screws come with gaskets.
Don't forget to insert the oil drain screw. Otherwise the fresh oil will pour right back out.
Their wrench size is 12mm.
All Vespa engines need SAE 30. We open the lid and pour in the whole bottle (250ml).
When the oil is completely filled in, we insert the new screw and gasket.
As you can see. It's really easy.
The clutch us working smoothly again and the gearbox is well lubricated.
You'll find all parts that we used in the text below the video or directly on sip-scootershop.com
See you...