Tip:
Highlight text to annotate it
X
In this clip we're going to talk about the tools that are required to make a diffusion
panel. One of the main tools you'll need is a hacksaw. These are fairly inexpensive and
you can get them at any hardware store. You don't have a hacksaw you can use a coping
saw. It'll take a little bit more effort on your part, but it will still work. You'll
need a tape measurer. You'll need some clamps just to hold the PVC pipe down so that they
don't move around. You'll need a pair of scissors, a stapler, and either a file or a wire brush
to knock the edges off of the end of it once you cut it. You'll also need a marker and
something to make a straight line with. A couple of other things you'll need is, you'll
need PVC primer, and PVC cement.