Tip:
Highlight text to annotate it
X
okee. Hi, I will show you how to produce some Armor
with Worblas finest art. Like these parts of a pauldrons for example.
With this example I will show you how it works. How you see it is already done also curved and it is very
stabil. First you have to know how stabil do wanna
have your parts You can chose one ore two Worbla sheets or
how I chose the sandwich version. Whit this version you need some craft foam which you
cover with Wobla. The craft foam should be in the middle like the meet in a sandwich
and the worbla is the bread. With this methode you can varying the thickness of the craft
foam, I choose 2mm and 3mm. Both are very stabil but the 3mm is much thicker and looks
massive than the 2mm. Okee. and now the sandwich methode with the
2mm craft foam. You dont have to look at the colour of the craft foam becauseyou cover
it with woblas and after that you dont see the colour. for the next step you need a pattern.
With the pattern you can transver it on the craft foam. Use a pen or something that works
on the craft foam. Then draw the outlines and cut it out. The next step is to cut out
the pieces of Woblas. Pay attention that you cut it bigger than the craft foam patter.
You need this
to make the edges. I draw on the rough page because on the shiny page the colour wont
dry and esaly smear. Then cut it out. The next step is to heat the Woblas. I do it first
on the rough page and the I tour it and heat it again. It works for me but you have to
choose your own path. The next step is to lay the craft foam on
the first sheet and press them togehter. Lay the craft foam on the shiny page it will better
stick together. After that you can lay the second sheet of worbla on top and press it
again. After some times there appears some bubbles
you can simply remove them with
the heatgund and some preassur. After all is covered with woblas and still
warm you
can carve it how you want. Use a relief is much easyer.
And now I will show you how
to make the edges. You can simpl cut it off or you can turn it around. so it looks much massiver. Now I show you
how it works. you have
to reheat it
and after that you have to press the ends together and then
you
can
cut the edges. after that you can reheat it again and modell the edges a bit.
Now i show you somw works I did. With the trash from
the worbla you can make some cool other things. Like this crown or what ever you want. Because you can
use Worblas fines art like a modelling clay. But if you will go bigger I
have made a whole brestplate.
please subcribe, like it or whatever you
want
to do.
So stay crunchy
Friendly greetings your Ta_dahh