Tip:
Highlight text to annotate it
X
Welcome to the presentation of printing on wood, where we use Multitrans Forever transfer paper.
Print Multitrans paper in a color laser printer or copier in mirror image. We use OKI C 511 laser printer.
Set the properties of the media type. In our case it will be Glossy Paper.
When printing open the back cover.
We use BluePressLine SWING heat press.
Put an Antistick paper on the press to protect lower plate from dirt.
Put a wooden base and printed Multitrans paper on it.
To the paper will not move attach it with a heat-resistant tape.
Cover it with the silicone pad.
Close the heat press and make transfer for 1 minute and 20 seconds in 200 degrees.
After opening the heat press take off the silicone pad and tear off the a heat-resistant tape.
Peel off the transfer paper.
This is the transfer on the wood made with Forever Multitrans transfer paper.