Tip:
Highlight text to annotate it
X
This is how to refill SAMSUNG CLT-508 and CLP-660-series cartridges. An original 508
cartridge set costs upwards of $500. Why not refill your perfectly good but empty cartridges
from as low as $39.95 a refill? Let me show you how you too can save over 70%.
Step 1. Use some long-nose pliers to remove these two springs.
Step 2. Using a screwdriver as a lever, pop out the two hinge pins that hold the cartridge
together.
The cartridge should now separate in two.
Step 3. Pull out the toner cap.
Step 4. Empty out all the old toner. This is very important to preserve print quality.
Here is a bottle of InkOwl's high-quality CLP-610 toner.
Step 5. Pour the whole bottle right into the cartridge.
Step 6. Put the toner cap back into place.
You will now need to install an InkOwl chip on your cartridge. Chips are always included
in InkOwl toner kits when needed.
Step 7. Cut off the plastic that holds the chip in place. For CLP-660 cartridges, cutting
will not be required.
Step 8. Pull out the old chip.
Step 9. Slide in the new chip.
Step 10. Align the pinholes and reinsert the hinge pins removed earlier. Be sure to install
the longer pin first. The shorter pin goes on the side with the two metal contacts.
Step 11. Reinstall the springs unhooked earlier.
Congratulations, your cartridge is ready to be installed! By refilling all four cartridges,
you'll save yourself $360 and put four less cartridges into the landfill.
Take a moment, think green, think refilling, think InkOwl!