Tip:
Highlight text to annotate it
X
So if you decided a different seat would work better for you the first step is obviously
removing your seat. The seat post that we have on this bike is made by a company names
Thompson the fairly standard design where you have 2 bolts holding everything on. You
can see by changing which bolt is tighter you can change the tilt adjustment. To fully
remove the seat what you have to do is unscrew one of these bolts until it is fully undone
and you can see that way I could slide a new seat right on without much trouble. The thing
to remember when you are taking your seat off you know your post is on there and you are doing to your bolt is try not to loose this little threaded brass
piece cause it is not at all like anything you are going to find at your local hardware
store, it is a odd piece it uses a metric thread, it is very small and the brass that
it is made out of actually serves as a barren to help you adjust the tilt. So next we are
going to put a seat back on.