Tip:
Highlight text to annotate it
X
Tools you'll need to shorten a freejack cable, provided allen wrench, wire cutters. To adjust
the fixture height, back out, do not remove the set screw and the tip of the connector
with the provided allen wrench. Next, back out, do not remove the set screw on the conical
connector. Pull out the coaxial cable. Cut the coaxial cable to desired length. Gently
twist the ends of the coaxial cable between your thumb and forefinger. Tap the conical
connector on a hard surface with the set screw facing down so the plate inside drops into
place. Feed and push the coaxial cable into the conical connector, the coaxial cable will
come to a stop point after being inserted three quarters of an inch into the conical
connector. The outer wrap wire will start wrinkling while being inserted another half
an inch into the connector. Hold the coaxial cable into place and tighten the set screw
in the tip of the connector. Firmly tighten the set screw on the conical connector. Pull
the coaxial cable towards the fixture to smooth out the wrinkles.