Tip:
Highlight text to annotate it
X
Today on our 2011 Hyundai Santa Fe we'll be installing the Tow Ready T1 Connector, part
number 118415. To begin our install we'll need to remove the rear threshold from the
vehicle here at the trunk. We'll pull the handle here opening the door. To remove the
threshold we'll peel the rubber molding away which will allow us to bet underneath the
threshold. With our rear threshold loose we already moved the jack tools. We'll undo the
three bolts that hold the tray in place. Next, we're going to go ahead and remove the
side panel covers to access our tail light warning. And you'll see down here in the cover
is our plug that we'll be using. We're then gonna use a piece of hard air tube as a fish
line. We'll run it through behind the panel and now the hole here is the bottom of the
panel. We can then take our T1 connector for the left
side and attach it
to
our air hose.