Tip:
Highlight text to annotate it
X
Welcome back, for the Pumpkin Cane you need Fimo Effect 404 orange transparent
and noctilucent. Also, I have used normal black and green. The tools I used are
knives and Clay Machine.
I create the gradient, for that I'll take the Fimo 404 and noctilucent. At Level 1 of
the clay machine, the polymer clay will pressed as long as a nice gradient can be
seen.
I extend the gradient. For this purpose I press the gradient through the machine,
from level 1 to 7
Roll the polymer clay to a 15 centimeter sausage and cut out five equal pieces.
The four outer parts are bent with the fingers. These are then wrapped around
the center piece.
With a flexible blade you need to cut the pumpkin in to get the space for eyes and
mouth. The black polymer clay I pressed at level 9 through the Clay Machine.
With the back of a knife you now manage some space for the green of the pumpkin.
If you bake the finished cane in the oven I promise you that your halloween
pumpkin lights in the dark.