Tip:
Highlight text to annotate it
X
Hi, this is Jon and in this clip we will be installing the closers. Now, for our top closer
we're going to want it installed about a quarter inch in from our door frame. Now, you want
to install your door brackets about one inch down from the top of your door. The next thing
you're going to do is dry-fit your components in place for where they should go and then
make a couple of marks with a marker to tell you where you need to drill for your screws.
Once you get your top closer installed properly, you can go ahead and test it and start on
the bottom one. Now, when installing the bottom closer it will be installed with the same
measurements and in the same procedures as our top closer. And lastly, we just, again,
want to test our door to make sure that our hinges are working properly. It's alright
if it doesn't fully close at this point because we're going to adjust the tensioning in a
little bit.