Tip:
Highlight text to annotate it
X
Hi, this is Jon on behalf of Expert Village in this video clip we'll be talking about
advancing the trimmer lines. As you use your trimmer the trimming lines will get shorter
and shorter maybe if you hit a fence it will break off a little piece. If it gets too short
it will go inside the spool, so before it gets to that point we are going to need to
feed some more lines out. The way to advance more line is to while the trimmer is running,
tap it once on the ground and that is going to feed the line out. As you're trimming and
you tap it on the ground the line is going to advance out and if it gets too much line
out as it spins it's going to cut itself off on this cutter, and that is going to size
that line to the correct length. Now as you are using the trimmer and you tap it on the
ground you're going to hear the line come out and cut off. It has a very distinct sound as to when that
line hits that metal cutter, if I flip it over I can see now that my line has been cut
off to the exact length that I need it at.