Tip:
Highlight text to annotate it
X
EN15 - How To Sublimate Glass Products In A Standard Flat Heat Press
Before you start you will need all of these items.
Create your image at 300dpi in RGB mode.
Size it 0.25” / 6mm larger than the substrate.
Print for normal viewing (not mirrored) using Sawgrass inks and sublimation transfer paper.
Preheat the press to 400°F / 204°C.
Set the time for 3-4 minutes.
Set the pressure to medium/high (40-60 psi).
Place the transfer onto the felt pad with image facing up.
Place the substrate onto the transfer sublimation side down.
Cover with a Teflon sheet to protect the heat press.
When time is finished quickly remove the transfer to stop the sublimation process.
Beware the substrate will be very hot!
Cool the substrate.
For a step-by-step guide please visit sawgrassink.com