Tip:
Highlight text to annotate it
X
Hi, I am Arina and this is a technokitchen
Today we are going to know more about interesting case
ideal , even perfect for NAS creation
NAS server is an expensive thing, other previous models cost more.
Now you will have a chance to build a system more flexible, powerful and reliable by yourself!!!!
In the case if you want to save money as much as possible you may buy already used case for.
A motherboard with a processor on the base of Core 2 for.
Add power supply , a little bit memory for, and you will get powerful system for NAS.
Today we are going to tell about space-saving, easy-to -use system!!!
Very new Germany company Eolize has sent us a case with build-in power supply,
and rather funny and amusing name SVD-NC-14-4)))))
We have to tell you that it is not an exclusive thing and we were looking for it in the NET
we have found twin brother, produced by another company.
The case was delivered in a rather simple box,
meanwhile, the producer doesn`t want to advertise and emphasis on its brand.
The reason can be either it`s a too new company and brand or it is done,
I mean the case, purposely for professionals who buy hardware and its opportunities and don`t pay a lot of attention to a colorful package.
The first thing that strikes our eyes and impressed us a lot is a weight. It`s rather heavy
5,6 kilograms!!! For such kind of cases it`s really serious numbers
Really thick steel, it`s also referred to the case`s panels, it`s also can be said about the case`s panels.
The case is a nonseparable, rivets add more proff.
When we turn over the case we see that feet are not plastic, they are soft and rubber, we appreciate such kind of an approach.
The front hinged door cannot be locked .But don`t be in a hurry to consider such a thing as a disadvantage!! The impressive thing that is worth paying attention is four mob tracks.
Well, every single of four SATA hard disks can be easily taken out without disassemble.
Every single bay can be locked, So, you see, that minimal level of defense is provided at least.
General size is 320x200x250 mm.
The case fits for mini ITX motherboard.
As the case is nonsepareble, we have to handle the motherboard only on each side of the case.
On the one hand there is opportunity to install one more expansion slot card , but it`s doubtful that you will build a system for games because on the other hand power supply`s power is 190 watt.
Level of a noise from the distance one metre is 35.5 decibel.
. The number of power cabels is limited, only to provide with electricity a motherboardand processor , two moleks connectors which supply with energy hard disks.
Case`s fan seems to be enormous at the first glance , but looking at it closer it`s only 120mm instead of 140mm.
Air intake occurs with the a help of side panels.
Interesting thing is that there are two variants of placing or locating a grid.
Everything depends on your decision whether you want it can be up or down.
The front door as well as slots for hard disks are perforated.
Video card`s length is 280mm, is long enough,
but a length of a processor`s cooler is limited, it shouldn`t be more than 40,5 mm.
There is a bus where you can install some hard drive discs.
On the front panel you find two USB 2.0
lack of any jakes, more time convinced us that the case`s destination is NAS, not a home computer.
Buttons power and reset successfully agrees with the whole design of the case
It`s indeed nice design!!!!
Well, we discussed the case for NAS` we consider that it`s quite successful device :)
It deserves bronze medal!!! For hardness and work with hard disks.
See you soon) Bye-Bye!