Tip:
Highlight text to annotate it
X
Today we are going to review part number BLTL-51-40D, this is the Blaylock easy lock for the setscrews
on a gooseneck coupler. It includes the master lock the master lock padlock. This part will
include the bracket or cover that goes over the setscrew, the three-quarter inch diameter
steel pin which will slide through the back bracket and under the setscrew. It will include
this washer, which Ive already pre-installed on the setscrew and includes this master lock
stainless steel padlock. Now this lock will help you fight back against trailer thieves,
its a simple yet effective way to prevent theft of this inner tube of your goosenecks
trailer coupler and it does have a simple installation. Basically, what Ive done here
already, is you just remove whatever setscrew you want it to lock, put the lock on.
If you remove the setscrew with the lock not attached, and then you install this washer
that comes with the lock set onto the setscrew behind the lock nuts. When you tighten down
and its in position and then you want to lock it down with the lock nut, youll just tighten
this lock nut and it will secure this washer securely on the setscrew. Now with that installed,
if you look at this bracket, this heavy duty bracket, aluminum bracket, it has a groove
cut right in it here that will allow it to slide over this washer and then cover the
setscrew. Youll take this three-quarter inch diameter steel pin, it has a three-eighths
inch hole in the middle for the padlock to go in. this will basically go through the
bracket, under the setscrew and through the other side.