Tip:
Highlight text to annotate it
X
EN04 - How To Sublimate Soft Polyester Fiber Products In A Standard Flat Heat Press
Before you start you will need all of these items.
Create your image at 300dpi in RGB mode.
Size it 0.25" / 6mm larger than the substrate.
Print in reverse (mirrored) using Sawgrass sublimation inks and sublimation transfer paper.
Attach the transfer using heat resistant tape.
Notice the image is bigger than the substrate.
Preheat the press to 400°F / 204°C.
Set the time to 1 minute.
Set the pressure to medium (40 psi).
Place a sheet of paper on the heat press to keep the press clean.
Place the substrate onto the press with the transfer on top.
Cover with a Teflon sheet to protect the heat press.
When time is finished quickly remove the transfer to stop the sublimation process.
Beware the substrate will be very hot!
Cool the substrate.
For a step-by-step guide please visit sawgrassink.com