Tip:
Highlight text to annotate it
X
Today on our 2013 Toyota Sienna, we'll be test fitting the 31x47 Pro Series Solo
Cargo Carrier for 2 I Inch Hitches part number PS1040100. We'll begin our test fit by
sliding the shank of the carrier into the opening of the hitch. After securing with
the pin and clip, we'll go over a couple clearance measurements. At the back of the
carrier, we have about 14 1/2 inches of ground clearance, closes part of the bike rack to
the closest part of the vehicle is about 6 1/2 inches and we've added about 39 inches
to the overall length of our Sienna. Now the exhaust in this model does that to the passenger
side and faces downward about 12 1/4 inches away, therefore, it would be all right carrying
heat sensitive materials on this rack. Now the cargo door does beak over the surface
of the cargo carrier at about 13 1/4 of an inch, this mean you can carry items up to
this height and still be able to fully open rear hatch. And that would complete today's
test fit for the Pro Series Solo Cargo Carrier part number PSs1040100 on our 2013 Toyota
Sienna. .