Tip:
Highlight text to annotate it
X
This video explains the process of connecting multiple Resusci Anne QCPR manikins with the SimPad SkillReporter.
Give every manikin a unique name or number.
Now you need to set up the network you want to use.
Connect the router to the power. After two minutes it will be ready to use.
Turn on the SimPad by pressing the ON/OFF button,and this welcome screen will appear.
Turn on one manikin at the time.
Make sure it is in WiFi mode.
The power LED is steady green, and the WiFi indicator is blinking green.
If this is the first time you have used the manikin, you now need to name it using the SimPad.
On the welcome screen, select BLS instructor.
Press "start session".
The manikin you have turned on, will appear with the default name Resusci Anne.
Change the name, so that it matches the physical name you gave to the manikin earlier.
This is necessary in porder to identify which manikin you are working with in the training session.
Switch manikin 1 off, and repeat the process for the other manikins.
You only need to name the manikins the first time you use them.
After all the manikins are renamed from the default, turn them all back on.
Select the manikins you want to connect with, and continue.
Now you can select wich network you want to communicate over.
The LaerdalNetMobile appears as recommended.
Each LaerdalNetMobile router is identified by the last four digits.
The SimPad will now connect with the manikins, and is now ready to use.
Choose your activity, and you are ready to start training.