Tip:
Highlight text to annotate it
X
[music]
>>Shane Crider: Welcome to KickStart where you get to see new products here
at AutomationDirect
What we’re going to talk about today is the line extension of our AcuAMP products.
What we have are some DC current sensors, AC ground fault sensors, and an AC
indicator.
We’ll start off with the smallest product first.
The AC indicator – you will run your power wire through this fixed core. It comes
with a tie wrap so you can secure it to the power wire.
And as long as there is current passing through here you will get a red blinking LED.
The input range is one half an amp up to one hundred amps.
Next up we have our DC current switches.
You can get these in a relay or a solid state output. Now I’ll let you zoom in – you
have red output LED or status LED, a green power LED, it has a trip point that is
adjustable.
And as you can see on this one it has a jumper here that has a selectable input range.
These are fixed core meaning you will have to run your wire through it.
And they are foot mountable, or you can purchase and optional din-rail mounting kit
that is part number DRA-2.
Next up we have our DC current transducers. Now, some of these are jumper
selectable on the input range.
The output you can get with a four to twenty milliamp output or positive to negative
ten volt DC output.
And you can get these in a fixed core like this one or you can them in a split core like
this one where you would simply clamp it around the wire.
Again these are foot mountable or you can purchase the optional din-rail mounting
kit.
Last up, we have our AC ground fault sensors.
I’ll let you zoom in again. These have a test button here so you can tell what a
ground fault is going to look like.
Again, it has a green power LED, and a red status LED.
They are jumper selectable.
And this is a fixed core. And also again foot mountable or you can purchase the din-
rail mounting kit.
Now these are for single or three-phase.
There is a total of nineteen part numbers on these new AcuAMP products.
And if you take a look we have the DC current switches and the DC current
transducers. We’ve got the UL and cUL listings, CE certified, RoHS compliant, and
they are REACH exempt.
On the AC ground fault sensors they are UL recognized, CE certified, RoHS
compliant, and REACH exempt.
And on the little AC current indicator. These are UL listed, and RoHS compliant.
You can find all these products on our website at AutomationDirect.com. Take a look
under our sensors and you will see our AcuAMP products.
Now, if you’re watching this video today on our YouTube channel please feel free to
drop us comment down below to let us know how you like our videos, or let us
know how you like our products, or how you plan to use these products.
Thanks for watching and we hope to see you soon.
[music]