Tip:
Highlight text to annotate it
X
Today in this 2008 Chevy Cobalt we are going to be installing the tow ready T1 connector
part number 118407. First, well need to access the rear cargo area. Next, we are going to
go ahead and remove the spare tire cover. Now, well need to get access to the wiring
behind the taillights. To do this there are two cargo hooks on both sides that will need
to be removed. With the cargo hook out of the way, we can go ached and pull the carpeting
back to gain access to the rear taillight wiring.
Next well need to disconnect the wiring going to the rear taillight socket. You need to
gently pull back on the locking inaudible and remove the connector. Now we can take
the yellow and brown wire connector our tow riding harness and plug inline with our manufacturers
wiring. Next well take the white wire with the perform terminal attached and ground it
here to
the body. Well use a self-tapping provided with our
install tip.