Tip:
Highlight text to annotate it
X
There may be times when you want add a new user to the system with a temporary code such
as for a baby-sitter or relative. In this video we will show you how to create a new
user code and delete it. First you will have to press the [settings] button which is the
first button at the top left. Then press the [4] button to select the set user code option.
here you will need to enter the [master user code] and the enter your code prompt. The
master user code is given to you by your security company. Then press the [*] button and you
will see the user option screen. To add an user, press the [1] button to select. At the
"Enter User No." screen enter an unique two-digit number and press the [*] button. At the "New
User Code" prompt enter a new 4 digit user code and press the [*] button. The keypad
will confirm the user setting and exit the settings mode. A short ding means that you
created the user successfully. A long ding means that there was an error, that the user
number already had an user code assigned. If there was no sound that means that the
user was not created; try again. To delete a user, press the settings button. Then press
the [4] button to set the user code. Then enter the [user code] and press the [*] button.
Then select the [2] button to select the "Delete and User" option. "Enter user No." prompt.
Enter the desired two-digit number and press the [*] button. The keypad will ding to confirm
that the user was deleted and it will exit the setting mode.