Tip:
Highlight text to annotate it
X
Hi, my name is Ella Seltzer for Expert Village. Now I'm going to show you how to finish off
your bracelet by adding the crimp tube on the end. You're going to take your piece of
chain and put it inside the crimp tube, like this. Then this is a little bit tricky, it
took me a few times to learn how to do this. Take your pliers and you're going to squeeze
one side of the tube down firmly over the chain. And then a little bit like an envelope,
you fold the other side of the tube over your chain. And give it a firm squeeze again because
sometimes the chain could still slide out. Okay, you can use your wire cutters to cut
off the excess wire if there's a little bit of excess chain stuck inside you want to trim
it off with the wire cutters. And then you take your jump ring, open it up just slip
it, slip the tube into the jump ring. Once again, we need our two pairs of pliers in
order to firmly close the jump ring.