Tip:
Highlight text to annotate it
X
Thank you for choosing Bali custom window treatments.
Vertical blinds and Sliding Panels are excellent choices for enhancing your patio doors or
large windows.
They are easy to measure and install as outside mounts.
An outside mount refers to blinds that are mounted outside of your window casing – either
on the wall or molding.
Outside mounts are ideal:
If there are any obstructions inside of your window casing -- such as handles
If your window casing lacks sufficient mounting depth to hold your blinds
If you want a clear view to the outside. You can install your window treatment so that
when the blinds are pulled open they will not cover your window opening.
Or, if you’d like to better control the incoming light.
Measuring for an outside mount is easy!
Here’s what you’ll need:
A sharp pencil and a steel tape measure.
Don’t use a cloth measuring tape as it could stretch or twist.
Also, the Bali Measuring Guide which you can access at baliblinds.com.
We suggest you print and use it to record all of your measurements.
The Bali Measuring Guide also has more detailed information and helpful tips.
Now, you’re ready to start measuring. Just follow these 3 easy steps:
First (may not edit)
Measure the width of your window to the nearest 1/8”.
We recommend adding at least 3” on each side of your window for sufficient light control
and privacy. Record the measurement.
Next
Determine the height of your blinds. Do this by locating where you want the headrail
-- or top of the window treatment -- to be mounted.
Keep in mind that you’ll need at least 3” of flat surface to mount the installation
brackets. This surface can be either on the molding or above it on the wall.
Mark the preferred location. And the last step…
Measure the height for the blinds.
Take this measurement from the floor to the top of the headrail location to the floor.
Deduct one half inch for clearance so the blinds won’t touch the floor.
For a regular window vs a patio door– Take the height measurement from the top of
the headrail to the bottom of the sill, or lower if desired.
Record your measurement. And that’s all there is to measuring for
Outside Mount Vertical and Sliding Panel Blinds. It’s as simple as 1-2-3!