Tip:
Highlight text to annotate it
X
Today on our 2013 Ford Edge we'll be test fitting the Prorack Two Bike Carrier for 1-1/4
and 2 Inch Hitches, part number pr8062403. Now to begin our test fit we'll slide
the shank of the carrier into the receiver tube of our hitch. We'll line up our hitch
pin hole and then thread in our anti-rattle bolt, tighten it with a wrench and put in
the pin on the other side.Next we'll go over a few clearance measurements. We have
a ground clearance of 11 inches. The closest point of the bike rack to the closest point
of our vehicle is about two inches. We've added about 24 inches to the overall length
of
our vehicle.