Tip:
Highlight text to annotate it
X
Hi I'm Jason with Redrum Studios. I have another bracelet right here that I've started to make
already. This is the one we're working on now. The reason I bring this out is so you
can see the two different kinds of jeans you're dealing with, like the thickness here and
the thickness here. This one's way easier to work with. It's a lot thinner. The holes
will go all the way through and this one has, you can't see the holes in this one so well.
So just so you can see, I brought this one out. This is what your holes should look like.
It should just look like a little tiny snag in the front. And in the back you'll barely
see anything. It'll just kind of be white. That's a perfect size for a stud. Like I said
you've really, you don't want to see through that. If you see through it, your stud's just
going to fall out. So be really careful when you're putting your knife in to, you know,
just turn it and turn it and turn it and then do from the back. And do it a couple of times
if you have to. Go all the way through. This one's just a lot easier to see. So I'll tell
you what we're doing on this one and I'll demonstrate it on this one so you can see
better. We'll put the studs and everything up on it next.