Tip:
Highlight text to annotate it
X
We went down the block to disarmament and hence the whole slide spring and spring guide
with the gun put together again is very simple slide comes back here to raise our armed lever
and stay there . Now we will see the lock has a built in part
having two guides here with two slots in the slide when the slide comes back by the detonation
of the ammunition the two bolts down go and unlock and places the barrel against the ramp
to take a new ammo makes this a piece with this cylindrical here later this pin when
the slide comes back presses cylindrical bolt that locks here in this part then brought
it forward when carried forward down this piece that is what brings the two guides that
lock into the slot of the slide. Here is the barrel would be with open slide
is ready to climb bullet bedroom when the slider is pushed to the barrel and carries
it back forward forgiveness to block and here is the cylindrical bolt stay open as explained
today when we come to below the cylindrical bolt hits the wall and floor guides against
the slide lock . Here we have the ramp well polished feed ramp
and the barrel is fluted. Now let's load the magazine with some shots
and we will look a little operation.
There is no doubt that all semiautomatic going well in a quick shot better other worse but
generally all is going well here in the sample grouped pretty well go all snap shot is a
shot this sector is not true. See you next God willing trying another semi.