Tip:
Highlight text to annotate it
X
Well. Hi ! I'm Thor's Hammer.I'm gonna show you the ScopeCam
I did for my gun. Here it is, that's a M7A1 G&P TROY, with
a M5 kit, G&P again. The M7 is here, without the scope
And the M5 kit starts here M5. Starting from the RIS,
the canon, the sight, etc... And here, the ScopeCam.
This is a telescope finder. And this is a
EVOHD CamSport. The finder and the scope are aligned,
so are the cam and the finder. The whole set-up is on
a riser, I guess this is used on snipers gun. The two white pieces
are made by stereolithography, by a web-service named Shapeways.
This is made of pretty strong plastic, but quite cheap. I did some test with rubbers,
then secure with tie-wrap.
Here is another riser
It's for my use, I use it to rise the scope. Without the riser, when I put my mask,
there is not enough room to aim.
I guess we're done. Oh yeah, I added a lens to protect
the finder. One little thing to remember,
You will have to properly synchronise the two camera, during post-prod.
For that, I basically use the two soundtracks,
and synchronise the shoot. Or you can clap your hands. Then you will know how to synchronise the two soundtrack.
Ok, we're done. Kids, time to bed. !