Tip:
Highlight text to annotate it
X
that's a quick idea, pretty much did it all in last live
so, i had the idea of piezoelectrical cooler if you don't know what is it clic on that annotation ->
and because now, maaany brands do AiO CPU coolers to get something cheaper and easier to mount than custom loop and smaller and sometime more performant than air coolers
i mixed up those 2 things using scythe looking (pretty raw look) and thats what i get...
it is a 2 slot, 25cm cm long, 25mm extra wide "PCI card" using a 100x36mm piezo cooler and WC rad + a half lenght rad for intake cooling
and here the waterblock, pretty raw as well, but then very small 8cm long 4cm wide and 1cm thick without the barbs
easy path for water to go through quickly and bigger fins at the middle (where most of the heat come from)
and because this thing will get over 1kg filled with water i added some supports here at the end which can be screwed at several heights
long one go 10cm after the "card" small one go 6cm after
to carry the water through the two rads there is a steel pipe at this side
and as you saw for the waterblock, unlike most AiO systems the pump isn't in the block, but in the rad (top right here)
like for most scythe cooler, there will be a fan controller on a PCI bracket (only control piezo cooler, pump has a fixed speed)
i did a 750 frame per animation render on this one (useless because i had to speed everything up 4x) and it took 50 houres to render :|