Tip:
Highlight text to annotate it
X
Hi there Is Kiwako . This time , I guide the ComicStudio Basic course .
The " image loading " , I will introduce "Differences layer settings " .
How to read image file reading → → image file
There are instructions to read from , and how to load a drag-and-drop .
Drag-and-drop at once , let's read the photo .
Grasp the square part , in this way , you can adjust the size .
You can also change from the position adjustment of the "Properties" .
I can also rotate. You can then rotate while holding down the
Shift key and rotate in increments of 45 degrees .
From " automatic adjustment " , or according to the outer frame of the dragonfly , you
can match the basic frame .
Then, from the image adjustment of "Properties" , determine the configuration of the layer.
I'll try loading in color "Representing color" .
If you click OK, the image is loaded , a new layer is created .
Icon here , changes to layer settings for each .
For example , this layer is " color layer " ,
This " black-and-white layer " , this is the "vector layer of black and white ."
For vector layer , I will introduce in the course of another .
Let's read in the layer different settings
also , So .
As before , I will drag and drop . Choose from the property → position adjustment
, " Auto Adjust " → to " adjust to the position last read ."
We will continue with our "gray" the layer settings .
In the case of gray , color reduction technique because it can be changed later , I click
OK as it is .
Gray layer was created . When you expand , for now " color reduction
method " is since the " tone" , and is expressed in tone .
If you "do not color reduction ", which is the layer , such as that in just black and
white photos . " The threshold ( threshold ) value " that's
, you can by changing the numeric value , you can thin or thicken .
It is such a feeling that's "pseudo- tone " . I think pseudo gradation is not used very
much . In the case of gray layer , which is read
"white" disappears forces .
The following is a black and white layer . To meet again in the position previously read
in the automatic adjustment , the image adjustment , select the black-and-white .
Put a check to " paste in the transparent white" , then, try to 110 now setting of the
threshold . I became like this.
When it is gray layer of before, but I can also change the settings later threshold here
, Once , once read in black and white layer
, it will not be able to .
It is a point when reading the background line and the pen of analog .
I think what threshold is suitable for the painting of their own , and then check , from
a number decisive factor , it is good when you load in black and white layer in the gray
layer before .
Is a black-and-white layer supplement .
If you do not want to read a transparent "white" , and un-check here .
When displaying the transparent part , and it is in white on like this.
The next , I will explain about the "black layer " .
It is the layer that is not available white .
From the tool palette , and that's black and white layer , you can use the white , but
that's the black layer , you will not be able to use .
It is to the absence of two-color , only black and transparent .
When drawing the commonly Since then find it was also white it useful
, I recommend the black and white layer .
Is a summary .
The color layer is a layer of full-color image .
The gray layer . There is " no color reduction " , are four
"threshold" "pseudo- tone " and " toning " .
In toning , you can change the type of tone from the "Properties" .
The black-and-white layer , when you read , you " read in the transparent white" way
. You should put the check here everyday .
In each layer , you can also select when you create a new layer .
I will introduce the features of the black and white layer to use well in the comic .
It was painted white at white ... eyes by drawing the face .
When you paint a solid , we want separate layer , and create a new layer black and white
. Will continue to fill .
In black-and-white layer , I change to a different color , the representation of black color
I can .
If you want to change , and then click the upper-left corner of the Layers palette .
You can change to another color when you click on the area of " alternative colors of black"
of the property . I try to set a different color each a solid
.
The black-and-white hair solid layer of pink ,
Solid ordinary black-and-white layer of blue .
I drew in black and white layer of green solid handwritten .
To return to the black by clicking the upper left corner of the Layers palette .
You can also change each folder .
Shortcut is Control + B.
When you view the black-and-white color layer , it is easy to check the bottom of the line
drawing , or are painted properly .
In addition, common use , it is as a layer specified .
To try , I put the specified put a tone in the cut here , a shadow that , come this way
. Color is attached to the specification , it
is easier to understand when I put a tone .
If you set the layer to draw down , You can paint without reference to the time
of fill .
I'll try to hit the characters in the trial .
If you want to paint a tone in the back of this letter ...
Check in : "Do not reference character " is out , when you use the tool fill , it does
not fill me to the bottom .
Also , check is out also : The " underdrawing that do not reference " ,
When you make a selection , and then fill , part of the layer is filled with left .
Now : If you check to " not see underdrawing " , fill to the bottom is .
It is a point when using the specified layer .
Specify layer , who was on the frame is easy to work .
The separately specified number , Specified for the background ,
Designation of the person shadow , I think it is good When you specify settings
such as , of tone .
Is difficult to work opacity of the layer of specified and is in 100% , 50% or less
is recommended .
It is a good idea to have it in "Layer underdrawing " layers specified , when you put a tone , and
while it is displayed, so can fill .
Roughly , we talked about the differences between layer settings but , what did you
think ? For vector layer , I will introduce in the
course of another . I think if there is a point in the course
of this time , you want to know more here , that do not know , try to make a supplemental
video if you can comment .
We'll see you in the course another video , take care .