Tip:
Highlight text to annotate it
X
All right, today on this old trailer, we're going to install the hydraulic brake assembly,
part number T2351100. Now, we're going to start off our install to hub our _ inaudible
0:00:12 removed so we can show how to remove the vacuum plate. First off, we'll go ahead
and disconnect the hydraulic line behind it. We're going to use a wrench to undo the fitting
and remove the line. We're going to take the line and point it upward to help keep the
fluid in the line. Next, we'll go ahead and unbolt the old vacuum plate.
There will be five nuts that we have to remove. We'll uninstall them and save the hardware
and then we'll go ahead and reinstall them later. Once the hardware is removed, we'll
go ahead and take off the vacuum plate. With the old removed, we can go ahead and install
the new one. We're going to make sure that the wheel cylinder is situated towards
the top.