Tip:
Highlight text to annotate it
X
Good afternoon, I want to introduce you to a new product, the ceramic tiles leveler
manufactured by the Spasic Plast company. I am Zoran Spasic, the owner of this company.
The leveler assembly consists of two parts and can be used for mounting the ceramic tiles,
it accelerates the assembly process and guaranties high quality finish.
One can use the leveler according to the "do-it-yourself" approach and it equally be used by the professionals tiler.
Let's go, the glue is applied to the floor.
The lower part of the assembly is placed at the edge of the tile installed previously.
The glue was already applied on to the floor.
We apply the glue on to the tile.
So you see, the tile can slip a bit at this point...
So one simply pulls on to the lower part of the assembly and locks the leveler using the upper assembly part.
The locked tiles are perfectly leveled.
This way we get perfectly smooth, plane tiles without even the smallest edge between the tiles.
The minimum joining distance possible is 1.5mm.
The penultimate operation of the mounting process is removing the levelers. One can use a common hammer...
or simply kick the levelers away.
This is the Arburg machine, the injection molding machine we use for producing the leveler.
Since today it's perfectly normal to improve the industrial procedure and craftsmanship in general,
based on the experience I had a broad I came up with the idea of developing my own tools right here in Serbia,
the ceramic tile leveler and so I started with the serial production.
It is my hope, that every Amateur using the leveler will be in the position to mount his ceramic tiles
by "do-it-yourself" and also achieve the best quality possible in the process.
www.spasicplast.com