Tip:
Highlight text to annotate it
X
Today I will show you a very special amulet made of polymer clay.
The material I use gemstones, gold Fimo Effect Metallic, Liquid Fimo, colored pencil, Dottingtool, clay machine, cutter, scissors and knives.
First, the heart of Fimo Liquid is made. Draw a heart with a red colored pencil.
On the red heart the Fimo Liquid is given. A thin layer maximal 2 mm.
Small bubbles will gouged out with a Dottingtool.
The heart is made of gold polymer clay. The polymer clay is rolled first at level 1 and at level 3 through the Clay Machine.
The heart is now cut out the template. The template you can find in the info box.
After 30 minutes in the oven it goes further with the Liquid heart. The heart is cut out with scissors.
After cutting you take a cup of water and put into the heart. The paper you can deduct now.
The golden band of the amulet is rolled by the Clay Machine at level 7.
One strip is an inch wide. The liquid polymer clay heart is now transparent and is attached to the gold. The pattern of the gold stripes you can choose freely.
The crown now gets a golden edge. Simply roll the polymer clay into a sausage and place around the edge.
The heart gets an edge too, the golden sausage here is thicker.
I sting me with the cookie cutter from a round circle. The circle comes with a Dottingtool in the center of the heart. Around the circle will come also an edge.
The gems are made of plastic and are placed on the heart. The Princess Amulet comes again at 110 degrees for 20 minutes in the oven and then glazed.