Tip:
Highlight text to annotate it
X
Today were going to review part number 42865UC1 this is the Dexter Trailer Hub Assembly with
the 8 on 6-1/2-inch bolt pattern. This hub assembly will fit a 5200-lb, 6000-lb and 7000-lb
Dexter axles with spindles that will require a 2-1/4-inch inside diameter grease seal.
This trailer hub will include eight of the 1/2-inch cone seat lug nuts. It will include
the inner bearing, part number 25580, the outer bearing part number 14125A. It will
include the grease cap and it will include the 2-1/4-inch inside diameter grease seal.
Now the bearing races are also included and they will be preinstalled or pressed already
into the hub. The outer bearing, you can see the race right
there, and the inner bearing would be right there. All of our hub assemblies will come
with the bearing races already installed. The bolt pattern on this is 8 lug on 6-1/2-inch
pattern. Basically the way you can measure your bolt pattern is normally on a wheel or
a hub assembly that will have an even number of lugs. You could just measure directly across
from the center of one stud to the center of
the other.