Tip:
Highlight text to annotate it
X
We hope you are enjoying your Fellowes AeraMax Air Purifier. This video will instruct you
on how to replace your true HEPA and carbon filters. First locate the filter drawer on
the right side of your AeraMax Air Purifier. To open the filter drawer compress the tabs
on both sides and completely pull out the filter drawer. If your air purifier is on
you will notice that it will automatically shut off as you pull out the filter drawer.
Remove and discard any dirty filters and place the new clean filters into the filter drawer.
Be sure to insert the carbon filter first followed by the true HEPA Filter with AeraSafe
antimicrobial treatment. You will notice that the arrows on your true HEPA Filter point
towards the filter drawer. Next simply push the drawer back into the air purifier until
a click is heard and your air purifier will automatically turn back on and resume functioning.
The next step is to reset the filter indicator light on our AeraMax Air Purifier. Make sure
the filter drawer is securely closed and air purifier is on, locate the filter icons on
the display panel. Next press and hold the filter icons for 3 to 5 seconds until you
hear a short beep, at this time the HEPA Filter icon will flash amber. Next tap the filter
icons to alternate between the HEPA and carbon indicator lights. Once the desired filter
is illuminated press and hold for 3 to 5 seconds until you hear a short beep. The indicator
light should turn off, repeat this process for each filter as needed. Under normal usage
Fellowes recommends that the true HEPA Filter be replaced every 12 months and the carbon
filter be replaced every 3 months. Enjoy using your Fellowes AeraMax Air Purifier. It's the
maximum protection for the air your breath.