Tip:
Highlight text to annotate it
X
Hi, my name is Payton. I'm the manager of Airsoft Hero located in the historic district
of Hampden in Baltimore, Maryland. And I'm Joshua Meyer. I'm the tech here at Airsoft
Hero. Our store features AEGs, accessories, apparel. We also buy used guns, accessories
and apparel and we also do quality tech work. Any details you can find on our website at
www.airsofthero.com. And we'll be talking to you about airsoft. Loading your gas gun
depends on what kind of gas gun you have. If you have a CO2 gas gun, you're gonna use
the small CO2 tanks. IF you have a green gas gun, you're gonna use the airsoft green gas.
Now to load your green gas gun, you're gonna take the magazine, you're gonna take your
green gas bottle. You're gonna insert it into the bottom, and when you charge it, you wanna
charge it for no more than about three seconds at a time. Three second bursts, and to fill
up the magazine all the way it takes around four to five three second bursts. Now that
this magazine is charged, I'm gonna load some BBs inside, and after that, insert the mag,
put the slide forward, and you're ready to shoot.
For CO2 guns, some of the CO2 magazines will have a cover, some of them will not. You need
to take the cover off, and then the gun will provide an allen key. You're gonna use that
allen key, and take out the screw inside. And you're gonna insert the CO2 so the top
is to the top of the magazine. After that's in, you're gonna put the screw back on, take
the allen key, and tighten it up. Now as you're tightening it up, you're gonna feel it get
a little tight. After that you need to turn it a little bit faster, and you're gonna hear
the CO2 feed into the magazine. After that, load your BBs, insert the magazine, send the
slide forward, and you're ready to go.