Tip:
Highlight text to annotate it
X
To insert a bobbin into the machine, first look for the H which is always on top when
you drop your bobbin in. The thread's going to be coming off the left-hand side. Bring
the thread all the way down and sometimes I'll even let it swoop around the top of the
bobbin. It will drop right into where it needs to go, right down here about 6 o'clock. If
you place your finger on the bobbin and then pull with your hand to the side, you'll hear
a little click. When you hear the click, and it's only about from here to here, about a
quarter inch worth of area, you're slipping the thread in, that's the tension for the
bobbin. Then bring the thread up over the top of this little area and there's a little
arrow pointing for you to bring the thread down here. And before I cut it, which right
underneath here is a cutter, you can go ahead and put the door back on. Just an FYI, you
see this little circle area, that's a magnifying glass, so if you can't see something, note
that you have that right at your fingertips. Slide this right on over the top of the bobbin
and then pull with your thread and it's ready to sew.