Tip:
Highlight text to annotate it
X
Today, on our 2013 Ford Explorer, we'll be test fitting the Rhino-Rack SXBS Roof Rack
for Raised, Factory Side Rails 53 inches long in black part number SXBS19. We'll begin
our test fit by placing the front crossbar on to the front of our roof on our raised
side rails. There's a black connections point where the raised side rails connect
to the roof which will use as a measuring guide tomake sure our front cross bar is perpendicular
to the raised side rails. With the front bar in position, we can use the included tensioning
tool to tighten down the silver bolt on the insideof the crossbar to bring the clamps
together tightly up againstthe raised side rail. We'll repeat this process for both
sides. Once everything is all tighteneddown and secured, we'll go ahead and insert
our end caps and lock them. We'll now go ahead and place our rear crossbar on to
the rear of
our roof.