Tip:
Highlight text to annotate it
X
Welcome to Buyspares.
This video will show you how to replace the filters in a Dyson vacuum cleaner to be
cleaned or replace.
Before replacing a part in any electrical appliance
you must ensure that the appliance is first unplugged from the mains.
Start by removing the cyclone body to access the top filter
Unclip the filter housing
and remove the filter which can then be cleaned with warm soapy water
The filter should not be put back into the vacuum until completely dried so we
recommend to have a spare set to use while one set is drying.
To clean the hepa filter
firstly unclip and remove the hose
and then unclip and remove the housing.
Rather than cleaning the hepa filter should be replaced with a new one every six
months.
Fit the new filter back into place
replaced the lid
and click shut.
Reattach the hose
and the cyclone body.
For all the parts you need visit www.buyspares.co.uk