Tip:
Highlight text to annotate it
X
Hi, I'm Dan, welcome to another installment
of my Airsoft Review
and
today we have the CYMA P.1093 based on the AK-47, full 1/1 scale
all plastic spring action rifle
you can get this going on BBGuns4Less for
£29.99 it was £60 but it has now dropped
price
This is a Custom painted AK
that I have painted for my friend
this is the stock, it is ABS plastic with rebar pipes inside to weigh it down
on the left side of the body there is a metal sling mount
got a plastic comfortable grip
trigger
magazine release
on the right hand side of the gun
full working saftey
and your fire mode, you got a metal cocking lever
here's your high cap magazine which holds around 400 rounds
you have a 700 meter
iron sight
here is your hand grip which also has been painted
the barrel
which is also metal
and your front iron sight
which is plastic
this is a 1/1 scale gun
it's pretty heavy
though this has been modified with extra weights to give it extra realism
here is your hop-up
just a simple switch which you can slide back and forth to adjust hop up
to *** the gun
first take off the saftey
pull back the metal cocking lever which is pretty stiff
but it's a very very simple slide action and ready to fire as you can hear
to take out the magazine
you press in
back first then front
and that's the magazine out
underneath
there's two holes
to screw it in rails if you want attach optics to this weapon
now lets take a look at the magazine, here is the magazine, it is all plastic holding up to 450 rounds
to access it, there is a little door on top
you pour your BB's in there
you probably can see there is all ready a few in there
close it
put it back in the gun, remember this is a AK, so front
followed by back
and then there is a dial underneath
which you wind up
you want to keep winding that up until they start to appear at the top
as you can see they are not rattling
so they are at the top, so let's give it a few more times
and that's ready to fire
this is a picture by iron sights it'ss a traditional AK iron sight with a 3 pin crown on the front
and a block on the back which is fully adjustable
now firing this gun, you got to pull back the metal cocking lever like I said
earlier as it is a single shot springer
it is pretty reliable
hits all the targets most the time if you go out with sights all nicely
lined up
and set for the correct distance
here is a better look at the distance we are shooting at
it's our typical shooting spot
we got a couple of cans up there but no target this time
as it couldn't pierce the paper against the wall
and here's a close-up of cans, doesn't have the power to go through one I'm afraid
it is a quite weak gun
but it still hit's it targets
could be used to the good back up weapon
here is a close up of the gun in action
I most mentioned now that the stock screws sit fully
as well has a little bit of body flex, the gun comes with a cheap strap
which snapped within ten minutes but apart from the gun just works fine