Tip:
Highlight text to annotate it
X
Good day, I'm Teun Blik from Paintballshop98 TV
This is a car stock, And I'm going to explain how to attach it to your Tippmann 98
We've got some questions about the installation of the car stock
That's why I'll give a short demonstration of how to install this car stock from RAP 4
First we'll need to get the backside of the reciever off, and then change the end cap for the stock
I'll start with bolts
Make sure the pins dont fall out and take out the end cap
Place the spring plus pin in the middle of the stock
It could be that the stock doesn't fit well, this is because you have to deform the plastic a bit
You might need to push a bit to get the reciever half back on.
I'n order to not damage the marker make sure the pins and parts are all in place
Else you might damage the parts, when pressing the reciever halfs back together, which is frustrating, and costs money
Make sure you press the reciever halfs firmly together, and screw the sides back together
And after a installation of only a few minutes, your marker has a car stock