Tip:
Highlight text to annotate it
X
Hi! This is John on behalf of expertvillage.com. In this video clip, I will be taking you through
the procedures for cutting your work piece on a metal cutting chop saw. The first step
is to set your angle plate to whatever angle that you want to cut at. Next you want to
make sure you position your piece flat on your worktable, after that you want to use
your vice, and clamp down the piece.
Again, make sure it is secure by wiggling it. Next you want to pull the trigger switch.
After the motor reaches full speed, lower the disc into the center of the work piece.
You want to use a smooth, firm and gentle downward motion. This will make a clean cut
through the work piece. Do not allow the saw to bump or jump when making contact with the
work piece. It will damage both the work piece and the disc.