Tip:
Highlight text to annotate it
X
Today on our 2012 Ford Escape we'll be installing the Curt T-Connector Vehicle Wiring
Harness with 4 Pole Trailer Connector, Part Number C56160. Now we'll begin here by
raising the rear hatch of the vehicle. This will give us access to the two screws on each
side that hold the tail light assembly in place. We will go ahead and start here on
the driver's side by removing the two Phillips-head screws. With the two screws
removed we will go ahead and gently pull out on the tail light assembly, there are two
additional clips on the underside of the light assembly that will come out as you gently
pull outward on the light assembly. There are two plugs that we'll need to remove
in order
to
set our light assembly aside.